00018 FERRULE FOR R7 HOSE
Non-skive ferrule for SAE 100 R7 hose
| Material | carbon steel |
|---|---|
| Surface | CR3+ zinc plating |
| Application | Fix hose with coupling after crimping |
Details about 00018 FERRULE FOR R7 HOSE
| PART NO. | HOSE BORE | DIMENSIONS | ||
| DN | DASH | D | L | |
| 00018-03 | 5 | 3 | 14.2 | 27 |
| 00018-04 | 6 | 4 | 17 | 29 |
| 00018-05 | 8 | 5 | 18.8 | 31 |
| 00018-06 | 10 | 6 | 21 | 31 |
| 00018-08 | 12 | 8 | 25.5 | 34 |
| 00018-10 | 16 | 10 | 31.5 | 36 |
| 00018-12 | 20 | 12 | 33 | 43 |
| 00018-16 | 25 | 16 | 41.5 | 50 |
Application: Two Polyester Braid hose(SAE 100 R7-EN 855 R7)
| HOSE PART NO. | DN | HOSE SIZE | HOSE I.D. | HOSE O.D. | FERRULE | |
| mm | DASH | in | mm | mm | NON SKIVE | |
| R703 | 5 | -03 | 3/16 | 4.8 | 10.3 | 00018-03 |
| R704 | 6 | -04 | 1/4 | 6.3 | 12.7 | 00018-04 |
| R705 | 8 | -05 | 5/16 | 7.9 | 14.3 | 00018-05 |
| R706 | 10 | -06 | 3/8 | 9.6 | 15.9 | 00018-06 |
| R708 | 12 | -08 | 1/2 | 12.8 | 19.8 | 00018-08 |
| R710 | 16 | -10 | 5/8 | 15.9 | 23.3 | 00018-10 |
| R712 | 19 | -12 | 3/4 | 18.9 | 26.5 | 00018-12 |
| R716 | 25 | -16 | 1 | 25.4 | 34 | 00018-16 |
Disclaimer:
The data contained herein is for information purposes only, despite careful checking, we cannot guarantee the accuracy of all information included on this site.
All data and information are based on currently valid standards, while our products are always subject to further development, and technical changes are therefore possible.
Share 00018 FERRULE FOR R7 HOSE With Your Fellows
Share to Facebook
Share to LinkedIn
Share to Twitter
